Detail Specifications
Body Style:
Cylindrical servo mounted
Reliability Indicator:
Not established
Pilot Diameter:
1.5620 inches
Pilot Length:
0.0620 inches
Overall Length:
2.230 inches
Undercut Diameter:
1.750 inches
Undercut Width:
0.0780 inches
Body Diameter:
1.767 inches
Shaft Diameter:
0.125 inches
Shaft Length:
0.562 inches
Body Length:
0.977 inches
Overall Diameter:
2.120 inches
Mounting Lip Diameter:
1.7670 inches
Mounting Lip Depth:
0.0930 inches
Contact Arm Electrical Off Position:
Fully ccw-cw
Actuator Type:
Single shaft
Effective Electrical Rotation In Deg Angular Rotation:
Between 165.0 and 175.0
Terminal Location:
Radially positioned over less than half the circumference
Mounting Method:
Clamp ring
Features Provided:
Nonmetallic shaft
Electrical Resistance Per Section:
4.25 percent, rated amperes c and better industrial clears
Electrical Resistance Per Section:
8.5 percent, rated amperes c and better finish
Electrical Resistance Per Section:
4.25 kilohms 2nd section
Electrical Resistance Per Section:
8.5 kilohms 1st section
Rotary Actuator Travel In Angular Deg:
360.0
Ambient Tempurature In Deg Celsius Per Section At Zero Percent Rated Power:
85.0 all sections
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-300.0/+300.0 all sections
Tempurature Coefficient Of Resistance Per Section In Ppm Per Deg Celsius:
-300.0 to 300.0 all sections
Power Dissipation Rating Per Section In Watts:
4.0 free air all sections
Fixed Tap Quantity Per Section:
1 1st section
Tap Location Tolerance Per Section:
-1.0/+1.0 ohms 1st section
Tap Location Tolerance Per Section:
-1.0 to 1.0 ohms 1st section
Resistance Tolerance Per Section In Percent:
-5.0/+5.0 all sections
Resistance Tolerance Per Section In Percent:
-5.0 to 5.0 all sections
Actuator Travel Control Feature:
Continuous motion
Tap Location From Ccw Terminal Per Section In Ohms:
4250.0 1st section
Ambient Tempurature In Deg Celsius Per Section At Full Rated Power:
55.0 all sections
Standard Taper Curve Per Section:
A all sections
Test Data Document:
80020-41297 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Terminal Type And Quantity:
7 tab, solder lug
Item Name:
Resistor,variable,carbon Composition
Manufacturer Part Numbers
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
